12
NUCLEONIX SYSTEMS PVT
. L
TD
5.5
HOW TO AVAIL CALIBRATION SERVICES (FOR INDIAN CUSTOMERS)
Nucleonix Systems offers radiation calibration services to its customers. Calibration services are provided for
Nucleonix Systems manufactured products only, in general, as a company policy.
How to avail calibration services:
It is best advised that each of the Radiation monitors including Area monitors are calibrated once in a year.
When you want to send your Radiation monitor / Area monitor / Contamination monitor for calibration to
our works. You may send the equipment for calibration, by following the steps given below:
1.
Our standard calibration charges per equipment (All types of Radiation monitors including portable
survey meters, contamination monitors & Area Gamma Monitors) are Rs: 2500 + P Freight
charges. You can email a 'work order' accepting these charges.
2.
Email your work order and despatch / send the equipment to our works if it is 5 years old or less
including details of mode of transport sent with docket particulars.
3.
Also mention in your work order & clearly indicate that you will agree to pay calibration charges & also
equipment repair charges additionally if the unit is faulty & requires repairs before one can take it up
for calibration.
4.
You are requested to ensure good packing to avoid any transportation damages. Especially if there are
external detector probes, they are to be packed with sufficient soft foam to ensure no damage in
transportation.
5.
Use only the specified following mode of transportation system for dispatching on door delivery basis.
XPS/GATI cargo / Courier/RPP/Speed Post parcel etc. Send the equipment on freight paid basis.
(Equipments sent by other methods such as Rail/Road etc will not be collected). Also you can cover for
transit insurance both ways if you wish. Nucleonix system is not responsible for any transportation
damages or loss during transportation both ways.
6.
Immediately on receipt of the equipment, we will send an acknowledgement & also a proforma bill by
email/ post.
7.
Based on the proforma bill, once we receive the payment, equipment will be dispatched back by similar
mode of transportation as mentioned above.
5.6
HOW TO AVAIL CALIBRATION SERVICES (FOR FOREIGN CUSTOMERS)
Foreign customers can calibrate Nucleonix make Radiation monitors/equipments in their country at any of
their accredited Radiation calibration labs. Nucleonix systems will be happy to provide any help and guidance
if needed, for calibration. Alternatively if you send the equipment here to India we can also provide calibration
services.
CALIBRATION STANDARDS LAB & FACILITY :
We have two calibration labs . (1) Low level Calibration Lab (2) High Dose Rate Calibration Lab
(1)
Low level Calibration Lab :
This has a Cs-137, 165 mCi standard. "Gamma Survey Instruments
Calibration" from Amersham.
This has NIST Traceability Calibration of all portable radiation monitors, survey meters, contamination
monitors, Area monitors etc., is carried out in this lab upto 1R/hr max doserates.
Gamma Survey Instruments calibration has Cs-137 source 161.5 mCi as on 5th Aug 2002. It is basically
a Gamma Survey Instruments calibrator procured from AEA Technologies UK/USA. Has NIST traceability
/- 7%.
