Nubert nuSub XW-700 Скачать руководство пользователя страница 7

Unpacking and Scope of Delivery

Unpacking

When unpacking your speaker, do not use sharp or pointed objects to avoid 

possible damage to the enclosure. Please keep the packaging in a safe place 

in case you need to transport the speaker at a later date.

Scope of delivery  

If the delivery is complete, it contains the following parts:

•  1 Subwoofer

•  1 Mains cable, 3 m

Auto-off

The subwoofer has an auto-off function. If the LINE IN is selected, the subwoofer 

will automatically switch in to standby mode after max. 20 minutes. The standby 

power consumption is in this case 0,5 Watts.

If the wireless input is selected, the power mode of the subwoofer is the same 

as the transmitting Master device. The standby power consumption is in this 

case 1,8 Watts.

The auto-off function can be deactivated in the app. 

Auto-on

The subwoofer has an auto-on function that can automatically wake the sub-

woofer up from standby mode when a signal is sensed. This function is only 

active if the subwoofer was set to standby by the auto-off function. To wake up 

the subwoofer, a signal must be present at the input that was selected when the 

loudspeaker went into standby. If the subwoofer was set to standby using the 

remote control or the app, the auto-on function is disabled.

EN 11/2019 · 

nuSub XW-700 / XW-900

3

Technical Data  

XW-700 

XW-900

Principle 

 

Active Bass Reflex Subwoofer 

Active Bass Reflex Subwoofer

Subwoofer chassis 

1x 204 mm bass driver 

1x 267 mm bass driver  

 

 

with polypropylene composite cone 

with polypropylene composite cone

Power of built-in amplifiers 

1x 180 Watt (rated power) 

1x 220 Watt (rated power)

 

 

 

1x 250 Watt (music power) 

1x 380 Watt (music power)

Frequency response 

26 – 120 Hz (-3 dB) 

21 – 120 Hz (-3 dB)

Input sensitivity   

0.3 Veff 

0.3 Veff

Max. Input 

 

4.5 Veff 

4.5 Veff

Standby power consumption 

(varies depending on selected source) 

0.5 Watt (Source: Line In) 

0.5 Watt (Source: Line In)

 

 

 

1.8 Watt (Source: Wireless) 

1.8 Watt (Source: Wireless)

Radio frequency bands 

radio transmitting power 

radio transmitting power 

Bluetooth module  2402 – 2480 MHz 

9.75 dBm / 9.5 mW 

9.75 dBm / 9.5 mW 

Network module 

5180 – 5240 MHz  

15.75 dBm / 37.6 mW 

15.75 dBm / 37.6 mW 

 

5736 – 5818 MHz  

15.75 dBm / 37.6 mW 

15.75 dBm / 37.6 mW

Hight  

 

42.9 cm (incl. feet) 

47.7 cm (incl. feet)

 

Width  

 

30 cm 

35 cm 

Depth 

 

34 cm 

40 cm

Weight 

 

12.5 kg 

19.5 kg

Care and cleaning tips

Caution!

Improper handling of the speaker may result in damage. 

•  Always unplug the speaker before cleaning it!

•  Before recommissioning, make sure that all connections are correct, that 

there are no short circuits and that the speaker is completely dry. 

•  Never use strong cleaning agents or solvents such as petrol, spirit or similar!

Enclosure

We recommend commercial window cleaner sprayed onto a cotton cloth. This 

allows almost all fingerprints and dust to be easily removed. Alternatively, you 

can also use window active foam.

We advise against the use of microfibre cloths! These can cause mini scratch

-

es in the surface.   

Diaphragms and Speaker Chassis

To remove dust from a loudspeaker chassis, a lint-free cotton cloth is sufficient 

to wipe the membrane lightly with very little pressure. 

Service

If you have any questions or problems during the commissioning of your Nubert 

system, please do not hesitate to contact our service team:

Phone:

 

0800 68 23 780 (toll-free, within Germany) 

0049 7171 92690-118 (international)

E-mail:

 

[email protected]

Please have your customer number ready!

!

3

Содержание nuSub XW-700









Отзывы: