Nubert nuPro A-100, Руководство по эксплуатации

Страница: 11 / 12

11
EN 4/2020 · nuPro A-100
Menu Sitemap
Note: to start navigating, press

Care and cleaning tips
Caution!
Improper handling of the speaker may result in damage.
• Always unplug the speaker before cleaning it!
• Before recommissioning, make sure that all connections are cor-
rect, that there are no short circuits and that the speaker is com-
pletely dry.
• Never use strong cleaning agents or solvents such as petrol, spir-
it or similar!
Enclosure
We recommend commercial window cleaner sprayed onto a cotton
cloth. This allows almost all fingerprints and dust to be easily re-
moved. Alternatively, you can also use window active foam.
We advise against the use of microfibre cloths! These can cause
mini scratches in the surface.
Diaphragms and Speaker Chassis
To remove dust from a loudspeaker chassis, a lint-free cotton cloth
is sufficient to wipe the membrane lightly with very little pressure.
The tweeters of all Nubert loudspeakers are equipped with a pro-
tective grille so that they can also be wiped off with low pressure. If
the dust cannot be completely removed, a make-up brush from the
drugstore is suitable.
Service
If you have any questions or problems during the commissioning of
your Nubert system, please do not hesitate to contact our service
team:
Phone:
0800 68 23 780 (toll-free, within Germany)
0049 7171 92690-118 (international)
E-mail:
info@nubert.de
Please have your customer number ready!

/

Keys

/

Keys Notes
SETUP

or
PAIR Automatic master / slave configuration, link out outputs only one channel
MENU SINGLE No master / slave configuration, link out outputs a stereo signal
DISPLY

or
VOLUME Displays the set volume after 8 seconds of inactivity
MENU LOGO Displays the nuPro logo after 8 seconds of inactivity
OFF Display turns off after 8 seconds of inactivity
LIM_DS

or ON Displays LIMIT when the protective limiter is active
MENU OFF Does not display the function of the limiter (the protective limiter is still active)
PRESET

or
PRSET1 MENU, long Press-and-hold: saves all settings as a preset (SAVING is shown for 3 seconds)
MENU MENU, short Short Press: loads a preset (LODING is shown for 3 seconds)
PRSET2
PRSET3
AUTO
MENU OFF
AGAIN

or ON Activates the automatic input sensitivity sensing
MENU OFF Deactivates the automatic input sensitivity sensing
DEFALT

or
OK MENU Resets the speaker to factory default settings (LODING is shown for 3 seconds.)
MENU

or
ON
Activates the auto on/off function
Deactivates the auto on/off function
Hinweis:
• If a nuPro is automatically configured as a slave speaker, you only have access to the DISPLY menu,
letting you select the display-mode of the Slave-speaker. All other settings are performed on the master-speaker.
• The menu item CHANNL is only available in the SINGLE configuration.