nubeca BA2010, Инструкция по эксплуатации, Страница: 9 / 13

M EM
S TART/STOP
M EM
S TART/STOP
M EM
S TART/STOP
14
Use the Memory Function
T
O
read the measurement value
Press the “MEM” button to view the latest measurement value
with the measuring date.
Long press the button and the value quickly changes.
To read the average value
Press the “MEM” button. The average value symbol will
display.
.............................................
the average value of
all measurent values
Turn to next
The 1st latest
measurement value
The 2nd latest
measurement value
The 60th latest
measurement value
The unit stores the blood pressure and pulse rate in the memory after
completing a measurement every time. It can automatically store 60 sets of
measurement values . The oldest record is deleted to save the latest
measurement value when more than 60 sets.
The unit also calculates an average reading based on the values of the latest
3 times measurement taken.
To delete the memory value
In the memory reading mode, press the “MEM” button for 4-6 seconds,
the unit will display “ ”
．
Press the “MEM” button again and confirm to select “ ” or
“ ”.
If you are sure all the data of corresponding user can be deleted, press
the “START/STOP” button, all the corresponding user’s data will be
deleted and the unit will turn off.
Note: if you have set “ ”, but do not press a button for 2 minutes,
the product will shut off automatically, but the corresponding user’s
blood pressure data will not be deleted. The delete operation must
be confirmed by user.
15
Use the Memory Function
.........................................