1.0 Installation cont.
2.0 Dimensions
2
Installation and Maintenance
OPUSDC-SA-60 Student Accomodation Duct Mounted Extract Fans
Veiw from underside.
Veiw from side
Air extract from
WC for example.
Grille available as
an optional extra.
Air extract from
bathroom for
example.
Grille available
as an optional
extra.
Air extracted to
outside via
combined supply/
extract grille
available as an
optional extra.
Flexible ducting
available as an
optional extra.
Control panel.
Figure 6. Typical installation.
The fan must be fitted indoors, away from any direct
sources of heat, water spray or moisture generation.
Please note a clear working space is required around
the installed unit to allow the cover to be removed and
provide sufficient access for maintenance.
The integral mounting bracket supplied with the unit can be
offered up to position on the ceiling or wall (see figure 2
and 4).
The fixing points for the bracket should then be marked
and the bracket installed with 2 screws ensuring that the
bracket is secure on the ceiling or wall.
Offer the unit into position inside the bracket ensuring the
access cover is face down, and locate the bracket into the
moulded bracket holders on the case sides (see figure 3).
Various spigot positions can be
utilised as required to suit the
system ductwork and extract
grilles.
The unit is supplied with one
spigot open and two ’closed’ as
knockouts when delivered but
they can be opened using a
hacksaw (See figure 7).
Figure 7. Remove closed knockout on spigot with a hacksaw.
A groove is provided as a cutting guide.
Figure 5. Wall mounted.
12. 05. 17. Leaflet Number 671739
