4
029 2085 8400
23. 06. 17. Leaflet Number 670901
Installation and Maintenance
FLAT2000L/R Low Energy Positive Input Ventilation Unit
N
Mains power Smoke Nc contacts
L
Flatmaster
PCB
L N
NC
C
230V
NO
Supply
230V
Telephone 02920 858 400
E
N
L
Optional
lamp
N
L
Mains
230V
50Hz
Fan unit
3 Pole
isolator
Fuse 3A
Remote Switch
(Supplied)
3
4.2 Remote Switch
4.3 Smoke alarm automatic shut down
If the unit is required to switch off in the event of smoke detection,
alarms are available with separate relay bases from companies such as:
Dicon Safety products – www.diconsafety.co.uk
Aico Ltd – www.aico.co.uk
5.0 SETTING THE UNIT
The speed selector is located on the PCB (see figure 12). The unit
has a choice of three speeds to suit the size of the dwelling and the
moisture being generated. The unit is factory set at No 3-High Speed.
We recommend that the unit is operated at this speed and the setting
reduced if and when necessary in the future.
6.0 MAINTENANCE
The maintenance requirements for this product can be found in the
“Product Safety – Essential Operational Checks” section, which is
located in this document and includes the replacement of the filter
(Our part number FLAT-FILTERKIT) every 12 months; this interval
may need to be shortened, if the unit is operating under adverse
environmental conditions.
7.0 WARRANTY
The unit has a 5 year warranty starting from the day of delivery and
includes parts and labour for the first year. The remaining 4 years covers
parts only. This warranty is conditional on the following:-
•
That the unit is installed strictly in accordance with this guide.
•
That the unit filters are removed and replaced at the
recommended intervals.
This warranty is void if the equipment is modified without
authorisation, is incorrectly applied, misused, disassembled, or not
installed, commissioned and maintained in accordance with the details
contained in this manual and general good practice.
The product warranty applies to the UK mainland and in accordance
with Clause 14 of our Conditions of Sale. Customers purchasing from
outside of the UK should contact Nuaire International Sales office for
further details.
8.0 AFTER SALES
For technical assistance or further product information, including spare
parts and replacement components, please contact the After Sales
Department.
Figure 8. Wiring the remote switch
Figure 9. Typical wiring (refer to manufactures specific instructions).
