2
05. 04. 22. Document Number 671572
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
AVS-NC
Installation Manual
1.3 Personal Protective Equipment
The following minimum Personal Protective Equipment (PPE) is
recommended when interacting with Nuaire product:
•
Protective Steel Toed Shoes -
when handling heavy objects.
•
Full Finger Gloves (Marigold PU800 or equivalent) -
when
handling sheet metal components.
•
Semi Fingerless Gloves (Marigold PU3000 3DO or equivalent)
- when conducting light work on the unit requiring tactile
dexterity.
•
Safety Glasses
- when conducting any cleaning/cutting operation
or exchanging filters.
•
Reusable Half Mask Respirators
- when replacing filters which
have been in contact with normal room or environmental air.
Nuaire would always recommend a site specific risk assessment by a
competent person to determine if any additional PPE is required.
2.0 INTRODUCTION
AVS
units are rectangular in section and shall be double skinned with
35mm infill panels and shall be manufactured from heavy gauge,
corrosion resistant Aluzinc steel, internally lined with acoustic material.
Four matching mounting feet are supplied with the unit. Units have
circular rigid spigots at each end. The spigot ends are fully detachable
for relocation onto matching attenuators. The fan should be with an
‘inline assembly’, positioned in series for optimum performance.
Units incorporate fully detachable top or bottom panels for
maintenance and inspection purposes.
AVS 1 units have a loose
control module for surface mounting up to 1 metre away from
main unit. AVS 8 and 9 units incorporate split access panels.
2.1 Code Description:
1
2
3
-
4
AV
S
1
-
NC
1. Range:
Aire-Volve
2. Fan Type:
S
= Single Fan
3. Unit Size:
1, 2, 3, 4, 4L, 5, 6, 7, 8, 9
4. Control Type
NC
= No Control
Airflow
1
General View Of A Standard AVS Unit Configuration
2
Typical AVS Unit (2-6) With Silencer And Four Mounting
Feet Employed For Ceiling Void Installation
3
Typical AVS-A Unit (2-6) With Four Mounting
Feet Employed For Ceiling Void Installation
3.0 HANDLING
Upon receipt of the equipment, an inspection should be made. Before
commencement of lifting, ensure that normal equipment safety checks
have been carried out.
A unit / module should be removed from the vehicle using a fork lift
or crane. Always handle with care to avoid damage and distortion, and
where lifting slings are employed use spreaders to ensure slings do
not come into contact with the unit case, or control pack. Correctly
position slings to avoid twisting of the unit case and observe the
centre of gravity before the final lift is made.
The weight of the unit is
available on the unit rating plate.
Dependent on model and size, units may be supplied in single or multi-
modular sections. Handle each section individually do not stack for
lifting or storage.
