Pal Products, Inc
2500, 48
th
Street South, P.O. Box 905
Wisconsin Rapids, WI 54495-0905
(715) 421-0445, www.nu-temp.com
countdown time. A voice announces the entered value. If you press and hold down HR.MIN,
and SECOND, the hour, minutes or second will advance quickly.
2. Slide REPEAT switch to YES position
3. Press
START/STOP
to start the countdown, the unit announces the time remaining to
0:00:00 and restart the countdown to 0:00:00, depending on the ^countdown time you set,
different alarms will be used.
Countdown Time
Alarm at 0:00:00
You Set
time > = 2 minutes
Your selected alarm sound for 1 minute
2 minutes >time >10 sec Beep Twice
Time < = 10 sec
Beep once
No alarm sounds if VOICE on/off' icon is showing.
USING MEMORY FUNCTION
One Countdown time can be stored in the memory which can be recalled by pressing
MEMORY, thus eliminating repeated setting the most-frequently use d count down time.
1. To store the most frequently used countdown time in the memory, first set the countdown
time, then press MEMORY. A steady "MEMORY" word appears on the display, indicating that
a count-down has been stored in the memory.
2. To use the countdown time stor showed in the memory, press MEMORY to recall the
memory and the display shows a flashing "MEMORY". Press START/STOP to start the
countdown
COUNT UP TIMER
USING COUNT UP TIMER
1 . Slide the function switch to
COUNT UP.
2. Press
START/STOP
to start count-up
3. To stop or pause the count up press
START/STOP.
To resume, press
START/STOP
again.
4. To reset to 0:00:00, first stop the count up, then press CLEAR.
5. The maximum count-up time is 23:59: 59. When reaching 23:59:59, it will start counting up
from 0:00:00 again.
3. To Clear the memory, press
START/STOP
to stop" the countdown(it is counting down). Then
press MEMORY to recall the existing memory, as shown by a flashing "MEMORY" on the
display followed by pressing CLEAR to clear the memory.
4. To store a new value for the memory, first clear the
memory, then follow step 1 to set a new value in the
memory.
SELECTING ALARM SOUNDS
There are 6 different alarm sounds to alert you when counting down to 0.00:00.
1. To select an alarm sound, press repeatedly
SOUND,
the unit will play each alarm sounds
accompanied by its corresponding icon on the display You can select the alarm before start
the countdown or during the countdown
2. When counting down to 0:00:00, the alarm will sounds for 1 minute. To stop the alarm,
press any button.
3. The alarm sound is only for countdown.
4. The alarm sound does not work in count-up or clock mode.
