19
For more information visit
www.nu-heat.co.uk
TEMPERATURE CONTROL
1
The
6
/
5
allow you to adjust the set temperature. When you press either key,
you will see the word SET and the desired temperature value. Use the
6
/
5
keys to adjust the set value.
2
Press
3
to confirm settings and return to the main display.
Note:
This new temperature is maintained only until the next programmed comfort
level. At this time, the thermostat will revert back to the programmed levels.
TEMPERATURE HOLD
The temperature hold function allows you to manually override the current
operating program and set a different temperature for a desired period.
1
Use the
< / >
keys to scroll to
HOLD
2
Press
3
to confirm selection
3
Use the
6
/
5
keys to set the desired Hold period
4
Press
3
to confirm selection
5
Use the
6
/
5
keys to set the desired Hold temperature
6
Press
3
to confirm selection
You will see the
HOLD LEFT
indication is displayed on screen. The time will
countdown the set duration and then revert to the normal program.
To cancel a temperature hold, select
HOLD
on the main menu, press
3
key, then
press
3
again while
CANCEL
is highlighted.
LOCKING THE NEOAIR
The thermostat has a keypad lock facility. To activate the lock follow these steps:
1
Use the
< / >
keys to scroll to
HOLD
& press
3
for 10 seconds.
2
The display will show 00:00 and you will need to set a four digit pin number.
3
Use the
6
/
5
keys to enter the first two digits
4
Press
3
to confirm
5
Use the
6
/
5
keys to enter the second two digits
6
Press
3
to confirm
The display will return to the main screen and display the keypad lock indicator
Ï
Note:
The keypad lock indicator is only displayed when the lock is active.
UNLOCKING THE NEOAIR
To unlock the neoAir press
3
once. The display will show 00:00 and you will need
to enter the four digit pin number you set previously.
1
Use the
6
/
5
and
3
keys to enter the first two digits
2
Use the
6
/
5
and
3
keys to enter the second two digits
The display will unlock and return to the main screen.
FROST MODE
1
Use the
< / >
keys to scroll to the
O
I
icon. The
FROST
icon will toggle
ON/OFF
each time
3
is pressed.
In this mode, the neoAir will display the frost icon and will only turn the heating
ON
should the room temperature drop below the set frost temperature
(see pages 21–22).
If the heating is turned
ON
whilst in frost mode, the flame symbol will be displayed.
To cancel the frost protect mode, navigate to the
POWER
button again and press
3
.
