NTT docomo FOMA N705i, Инструкция по эксплуатации

Страница: 475 / 518

22
12
Click "OK"
You need to restart the PC to enable the optimized settings. If the restart selection screen appears,
click "
はい
" (Yes).
Execute communication.
→
p.24
Easy settings: "Settings for 64K data communication
using mopera U or mopera"
d This section explains how to specify settings for 64K data communication at the maximum speed of
64kbps. The DoCoMo Internet connection service "mopera U" or "mopera" will be used as a
provider.
d
64K data communication is charged according to the length of time you connected.
d
Note that the communication charge can become expensive if "64K data communication" is used
for a long time.
1
Click " かんたん設定 " (Easy settings)
2 Select "64K データ通信 " (64K data communication) and click " 次へ " (Next)
3
Select " 『 mopera U 』への接続 " ('mopera U' access) or " 『 mopera 』への
接続 " ('mopera' access) and click " 次へ " (Next)
See p.23 if you use a provider other than mopera U or mopera.
4
Enter the access point name and
select the modem, and click "
次へ "
(Next)
The "64K データ通信設定 " (64K data
communication setting) screen appears. You
can specify the name of the connection. Enter a
name easy to recognize in the "
接続名 "
(Connection name) column.
You cannot use the following reserved
characters: ¥/:
＊ ?!<> │ (half-pitch only).
When using the FOMA USB Cable with Charge
Function 01 (optional), confirm that modem
name is set to "FOMA N705i".
Select "
設定しない
" (OFF) or "186
を付加する
"
(Add 186) for the caller ID settings.
5
Specify a user ID and password,
select the accessible user and
click "
次へ " (Next)
You can leave user ID and password blank for
the mopera U or mopera connection.
When "
すべてのユーザー " (All users) is
selected in the " 使用可能ユーザーの選択 "
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
For Windows Vista
Specify the user ID and password and click
"
次へ " (Next)