Remove the cable lugs from both poles of the battery. Slow
movements to the back and forth make this relatively easy.
The defective battery is replaced by a new one now.
Push the cable lugs back onto the poles of the new battery.
Pay attention to the polarity!
The red pole of the battery must be connected to the red socket!
Carefully push the new battery into the case.
Make sure that the battery is not tilted; it should rest evenly on
the two brackets on the front.
Before placing the base plate, pay attention to the correct position of the metal plates on each side:
If a holder is loose, you can tighten the corresponding screw carefully.
Put on the bottom plate and fix it again with the four screws.
Note:
Please ensure proper disposal of the old battery
X
