NTI XTENDEX 300 Foot HDMI and IR Extender
12
INFRARED CONTROL
Model ST-C6HD-IR-300 (and each rackmount module) includes ports for connecting an infrared emitter and receiver (included) to
work in conjunction with the IR remote control used to operate the video/audio source. Connect the receiver to the “IR IN” port
on the Remote Unit and the emitter to the “IR OUT” port on the Local unit. Position the end of the receiver such that the signal
from the remote control can easily reach the IR sensor. Position the end of the emitter such that the extended signal can be
sent to the video/audio source.
Figure 14- Connect IR Emitter and Receiver (models with IR support only)
3.5MM Mono Plug
IR Emitter
3.5MM Stereo Plug
IR Receiver
IR-RCVR-3
IR-EMTR-3
Note: The IR Emitter and Receiver work within a frequency range of 33-40kHz. Check the
specifications for the device you are extending to make sure the XTENDEX will work with it.