SPLITMUX Quad Screen 4K 18GB Multiviewer
61
System Settings
Description
Unit Settings
Name
Unique name for this SPLITMUX to appear on the web interface login page and header of each
web interface page
Keypad Pin
PIN number that must be entered before OSD mode can be accessed to change settings- 4
digits using buttons 1-4.
0000 (default) = No PIN required
Serial Port Settings
Baud Rate
Baud rate for RS232 commands- select a value between 1200 and 115200 bps
Serial Address
Serial Address for RS232 commands and for the IR Remote- select value from 1-15
OSD Screen Settings
Horiz Offset Position
OSD Horizontal Offset from left (0-70%) Use Arrow Buttons to move
Vert Offset Position
OSD Horizontal Offset from top (0-70%) Use Arrow Buttons to move
Network Configuration
The Network Configuration screen is where all network settings are entered. These settings determine how you will remotely
access the SPLITMUX. Choose between your basic network (IPv4) settings and several miscellaneous server settings.
Figure 58- OSD Network Configuration