NTI VIDMUX VGA Video-Only Switch
4
INSTALLATION
Figure 3- Make cable connections to the VIDMUX
Cable Connections
1. Turn OFF power to video source(s) and monitor(s).
2. Connect the supplied VEXT-3-MM cable between the video port on a video source and the “VIDEO 1” connector on the
VIDMUX.
3. Connect video cables from additional video sources to the remaining “VIDEO x” ports on the VIDMUX.
FYI: Additional VEXT cables are available from NTI in 1.5,3,6,10,15,25,35,50,75, and 100 foot lengths.
4. Connect VGA monitor to the “MONITOR” connector on the VIDMUX.
5. Connect the IEC power cord to the IEC connector.
RS232 Control
(Applicable to models ending in “-RS” only)
RS232 control can be achieved using a separate user terminal or CPU with a terminal program. To make a terminal connection,
connect a serial cable (specifications on page 11) between the user terminal and the 9 pin DIN female connector on the VIDMUX
labeled "RS232". (See Fig. 3)
Power Up Sequence
1. Power ON the VIDMUX.
2. Power ON the user monitor.
3. Power ON each video source connected.
REAR VIEW OF SE-15V-8-RS
V
I
D
E
O
1
M
O
N
I
T
O
R
V
I
D
E
O
2
V
I
D
E
O
3
V
I
D
E
O
4
V
I
D
E
O
5
V
I
D
E
O
6
V
I
D
E
O
7
V
I
D
E
O
8
R
S
2
3
2
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
R
CPU
VGA
Multi-Scan
Monitor
VGA
Multi-Scan
Monitor
Control Terminal
15HD male
Keyboard
Mouse
VEXT-3-MM
(Supplied)
Existing cable
15HD male
Video Connector
9DB female
Serial Connector
9DB male
Serial Connector
15HD female
Video Connector
