NTI E-AVDS-CELC, Инструкция по установке и эксплуатации

Страница: 1 / 9

1
E-AVDS-CELC
Automatic Voice Dialer
INSTALLATION AND OPERATION
MANUAL
INTRODUCTION
The E-AVDS-CELC Automatic Voice Dialer is used to send voice alert messages from an ENVIROMUX Enterprise Environment
Monitoring System (SYSTEM) to any user’s cell phone or device capable of receiving voice messages.
The E-AVDS-CELC
P includes a 12VDC power supply for connection to E-MINI-LXO, E-DI16DOR16 or any other SYSTEM where an
external power supply will be needed.
OPEN THE E-AVDS-CELC
There are four tabs that hold the case together. Two on the top side, and two on the bottom side. To open the case for jumper
placement, press down firmly on the seam of the case near the tabs on one side of the case and snap the case halves apart.
Tabs
With the rear of the case removed, two counter-sunk
mounting holes are provided on the rear cover. Use
these to secure the E-AVDS-CELC to your desired
mounting location.
Mounting Holes
Rear Cover