NTC vengio, Руководство пользователя

Страница: 9 / 11

UME-TVW01-05/16 www.newtableconcept.com Page 9
18 Open the table and assemble the legs module . Fix the legs module to the table top with the two M6
cylindrical screws (Fig. 31 and Fig 32).
Fig. 31 Fig. 32
19 With the table open, remove the piece of foam and the wooden spacer (Fig. 33).
20 Make sure both legs touch the floor by rotating the table around the top central screw of the
mounting plate (Fig. 34).
Fig. 33 Fig. 34
21 Tighten the six screws of the mounting plate (Fig. 35). Pay attention not to scratch the frame .
22 Position the wall image mounting hole template centred with the table and mark the holes (Fig.36).
23 Add reference marks around the two circular mark (Fig.37).
Fig. 35 Fig. 36 Fig. 37