7
Overview
With 4 balanced analogue inputs and 8 outputs with full matrix mixing capabilities, the ID48 gives the flexibility you need
to integrate into your system. Compressors are available on every input as well as a high pass filter, 6 bands of parametric
EQ and up to 1.3 seconds of delay.
Routing to outputs can be configured to either mix-matrix mode, free-routing or several pre-configured routing options.
Flexible channel linking enables quick and easy configuration of common crossover setups or customised configurations as
required. Every output channel has high and low pass filters, 8 bands of parametric EQ, up to 1.3 seconds of delay as well
as a new limiter designed to offer the best driver protection with the lowest distortion.
The ID48 runs at 96kHz as standard but can be switched into 48kHz mode to take advantage of 48dB/oct output crossover
filters and two bands of dynamic EQ on both input and output channels.
The Ethernet based PC control software gives you the ability to not only control all the devices on a network but also to
store preset memories and configure systems offline.
Key Features
4 Analogue Inputs, 8 Analogue Outputs
Sample rate switchable between 96kHz and 48kHz (adds DEQ filters and 48dB/Oct crossover filters)
Input Processing Features:
Soft Knee Compressor
6 Parametric EQs
24dB/Oct HPF
2 bands of Dynamic EQ (48kHz mode)
Gain, Polarity, Delay
Routing Matrix Modes:
Mix Matrix, Routing Matrix, Preset Configurations (2x4, 4x2, 1x8, 2x3+2)
Output Processing Features:
6 Parametric EQs
Crossover Filters up to 24dB/Oct (96kHz mode) 48dB/Oct (48kHz mode)
2 bands of Dynamic EQ (48kHz mode)
Gain, Polarity, Delay, Limiter
Remote control via 100Mbps Ethernet, USB Type B
Up to 30 presets may be stored for offline recall