NSS Wrangler 2730 DB, Руководство по эксплуатации, Страница: 16 / 56

Battery meter is
flashing code
LED’s scroll left to right = throttle pot
adj.
Throttle pot neutral not set to2.50kohm
All LED’s flash = estop button pushed Release estop button.
Brushes will not shut
off. Brush deck switch arm may be bent or
broken. Bend the arm on the switch upward, or replace the
switch.
Sidekick pump not
operating
Turned off, water valve is off, brushes
turned off.
Ensure pump, solution valve, and brushes are on.
Improper wiring.
Sensor plugged.
Inspect/repair by qualified technician
Remove sensor and blow air (5psi [.03MPa] max)
thru in the opposite direction as the arrow on the part
to clear the obstruction.
Sidekick operating,
but not pumping
chemical Vacuum leak at fittings on bottle cap,
Squeeze tube cracked, chemical
bottle empty.
Check fittings at bottle cap for leaks.
Replace squeeze tube if cracked. Fill chemical bottle.
NOTE: If any problems remain after taking the above steps, contact your local authorized
distributor / service station for further evaluation and repair.