background image

PREDATOR CX300HP

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS

BEFORE OPERATING OR SERVICING MACHINE

DANGER

!

Failure to Observe These Instructions Can Cause Personal Injury
to Machine Operator, By-standers or Possible Machine Damage.

SAVE THESE INSTRUCTIONS

NEVER attempt to service or perform maintenance functions while machine is plugged into an electrical
outlet.

ALWAYS unplug machine before attempting to service the motorized brush attachment.

NEVER operate in standing water. NEVER expose to rain. ALWAYS store indoors.

NEVER overfill recovery tank or allow water to enter vacuum standpipe. This will cause damage to the
vacuum motor and possible electrocution.

NEVER operate machine with a cut, abraded or taped cord.

NEVER operate machine with a broken grounding blade on the plug.

ALWAYS replace the entire cord when the cord or plug is damaged in any manner.

NEVER handle the machine, cord or plug with wet hands.

NEVER drop or insert any object into any machine opening.

ALWAYS keep face, fingers, hair or any other body part, or loose clothing away from any machine
opening or any moving part, particularly the revolving brush.

NEVER leave the machine unattended when plugged in. Unplug the machine from the electrical outlet
when not in use.

ALWAYS turn the machine off before unplugging it from the electrical outlet.

NEVER operate this machine in the presence of flammable or combustible liquids or fumes.

When any electrical motor, switch, cord or plug service is required, maintenance should only be done by
an authorized service station, an electrician or other qualified persons.

NEVER operate this machine if it is not working properly, if it as been dropped, damaged, exposed to
weather, or dropped into water. Return the machine to a service center for examination and repair.

NEVER operate this machine with any air opening blocked. Keep all air openings free of dust, lint, hair,
ect.

NEVER operate this machine without solution tank filter screens or vacuum standpipe filter screen in
place or if they are clogged. Clean all filter screens after every use.

ALWAYS store this machine indoors. Protect it from rain or snow.

NEVER spray the top of the machine with liquids.

DO NOT pull or carry this machine by the electrical supply cord, use the cord as a handle, close a door on
the cord, pull the cord around sharp edges or corners, or expose to heated surfaces.

NEVER disconnect the plug by pulling on the cord. To disconnect the cord from the outlet grasp the plug,
not the cord.

ALWAYS unplug this machine before attempting to service.

ALWAYS use a defoamer which will prevent a buildup of foam in the recovery tank. If a defoamer is not
used, the motor can be damaged from shampoo being pulled into the vacuum motor.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Содержание PREDATOR CX300HP









Отзывы: