GENERAL INFORMATION
•
Now that the machine is unpacked remember
to recycle all packing materials.
•
Inspect the machine for damage or missing
components. If damage is found, contact the
local freight company to file a freight claim.
ASSEMBLY
Handle
•
Place the operating
handle on the peg
provided.
•
Using a standard
screwdriver, secure the
handle with the two pan
head screws provided
with your machine.
Debris box
•
The debris box should already be in the
machine. If not, place it in with the opening
toward the front of the machine and the filter
slots facing upward.
Battery
•
This machine comes with a 9 Amp hour,
sealed lead acid battery. The battery needs to
be charged for 8 hours prior to use.
•
To install the battery lift the battery
retainer latch at the top of the battery
compartment, located at the rear of your
machine. Holding the battery by the handle,
making sure the terminal contacts are on the
right side, slide the battery into the battery
compartment.
Battery Charging
This machine had the option of recharging the
battery while still in the machine or by using a
battery docking station.
Battery in Machine
•
Ensure that the battery has been properly installed
in the machine.
•
Plug the charger into an appropriate 110-120VAC,
60hz outlet.
•
Insert the charging plug into the charging port on
the right of the machine.
•
The Red light on the charger will flash when
charging in complete.
Battery in Docking Station
•
Remove the battery from the machine.
•
Holding the battery by the handle, making sure the
terminal contacts are on the right side, slide the
battery into the battery docking station.
•
Plug the charger into an appropriate 110-120VAC,
60hz outlet.
•
Insert the charging plug into the charging port on
the back right of the docking station.
•
The red light on the charger will flash when
charging is complete.
Machine Operation
The handle should be moved to a comfortable
position to operate this machine. With your foot
depress the locking device at the back left of the
machine to release the handle. Turn the machine
on using the toggle switch located on the top right of
the machine.
When finished, toggle the switch to “Off” then push
the handle forward. It will automatically lock in the
upright position.
https://harrissupplyind.com - To Order Parts Call 608-268-8080