NSO KT1601, Инструкция по эксплуатации

Страница: 232 / 257

■ Map and GPS Function
Symptom Check item
AUTO-GPS
service
information
cannot be
set. • Check if the AUTO-GPS
function is deactivated due
to low battery power.
• Check if the AUTO-GPS
function is deactivated
due to low battery power.
If the AUTO-GPS function
is deactivated by the "Low-
power operation settings",
the AUTO-GPS service
information cannot be
set. In that case, change
the "Low-power operation
settings" to "Not suspend"
or charge the battery to set
it. → P182
• Check if the AUTO-GPS
operation setting is turned
OFF. → P182
Error Message
Error Message Description
No SIM card The nano UIM card is
not working properly.
If the problem is not
resolved by removing
and reinserting the
nano UIM card, contact
"Repairs" (in Japanese
only) on the back cover
of this manual.
No service You cannot use this
terminal because it is
out of the service area
or it is in a place where
there is no signal
reception. Move to a
location where you can
get signal reception.
PIN1 code blocked
Enter PUK Enter your PIN unblocking
key correctly. → P187
235
Appendix/Index