-
4
-
Only in case of VR-E, before removal of the Nose Hood, remove the Insert Joint.
Protect the Sheath Ass’y and the Insert Joint with emery cloth and turn counterclockwise with T-2 to remove the Insert
Joint.
2-2 Remove the Rear Bearing
Insert DT-41 into the rear end of the Bur Lock Ring and unscrew R. Bearing Retainer Nut to remove Bearing. By
removing a R. Bearing Retainer Nut, a Return Spring, a Return Spring Washer, and a Bearing are drawn from the Bur
Lock Ring.
2-3 Remove the Slide Ring
Insert DT-145 into the Bur Lock Ring from front and unscrew Bur Lock Ring Retainer to remove Housing.
Slide out the Bur Lock Ring Retainer and the Housing. Remove two Balls and a Slide Ring from the Housing.
Insert Joint
DT-145
DT-203