4. Attachment of The Tube
Attach an appropriate tube-retaining ring to the tubes
of the handpiece side motor cord, paying attention to
the following directions. (Fig.5)
Fig.5
Tube
Tube-retaining Ring
■
Tube-retaining Ring
Attach to the tube with the inside chamfered
part facing outward.
Chamfered
Part
(Thick, with line)
・・・・
For Coolant Tube (Transparent)
(Thick)
・・・・
For Water Tube (Blue)
(Thin)
・・・・
For Chip Tube (Yellow)
Fig.6
Tube
Barb
Securely push the tube-retaining ring over the barb
connection. (Fig.7)
Fig.7
Notice
If alcohol is applied to the tube, it makes it
easier to insert the barbs.
Barb
Press In
Push the tube-retaining ring
to the end from the barb.
Tube-retaining Ring
Refer to the Operation Manual “Ti -Max NL400” for
other handling information.
'05.02.01
N
1
2
3
Attach each tube of the handpiece side motor cord
from step to match the identical colored tubing on
as the control box side motor cord. (Fig.6)
1