NSD VE-2CC, Технические характеристики и инструкция по эксплуатации

Страница: 21 / 32

16
7. NOMENCLATURE and FUNCTION
7-1. Part Identification and Function
①
Terminal block of external power supply
Connects to 24VDC and ground wire by the input terminal
of the external power supply.
②
ZERO SET button
The position data is “0” (zero point setting) when pressing
the button more than 1 second.
③
LED
L-RUN: Lights ON when communicating with CC-Link.
L-ERR: Lights ON when SW settings of NODE and BR
have an error.
SW setting is changed during the power supply is
ON, and then LED blinks.
SD: Lights ON when sending the data.
RD: Lights ON when receiving the data.
RUN: Lights ON when the system operates normally.
④
Communication connector
Connects the connector of CC-Link.
⑤
NODE, BR
Sets the communication speed(baud rate) and station No.
of CC-Link.
⑥
Sensor connector
Connects to ABSOCODER.
For more details, refer to “6. WIRING”.
⑦
Rotation direction setting switch of ABSOCODER
Switch 1: Sets the rotation direction
of ABSOCODER by turning
Switch 2 to 8: N/A
①
②
③
④
⑤
⑥
⑦