Parts Description
FIG. 10 ~ Remote Control
A.
On / Off
B.
8hr timer
C.
3 Speeds (Low / Med / High)
D.
2 Modes ~ Breeze (Variation) &
Sleep (Gradual Slow Down)
E.
Oscillation
FIG. 9 ~ Parts
1.
Control Panel (top)
2.
LCD Screen
3.
Front Grille (Air outflow)
4.
Oscillation Base w. Non-slip feet
5.
Back Panel (Air intake)
6.
Carry handle
FIG. 11 ~ Manual Controls
Assembly Method
♦
Please assemble correctly according to the following sequence.
♦
Please keep the original packaging for future storage.
FIG. 1
FIG. 2
FIG. 3
FIG. 4
Fig 1
Assemble Base Plate
a.
Gently up-end the fan.
b.
Remove the butterfly screws from the base of the fan. Keep safe.
c.
Join the front & back base plates together.
d. Make sure the holes of front base correspond with the holes of rear base, Fig.1
e. Click the two base plates firmly together as indicated.
Fig 2
Fixing Base Plate to Fan
f.
Guide the power cord from the front, along the groove towards the back of
the fan, clipping it under the lugs on the inside of the oscillation pillar.
g.
Feed the power lead through the hole in the base plate.
Fig 3
h.
Arrange the base plate with the power cord hole at the back and align notch
on fan base with the grove on the oscillation plate surround.
i.
Make sure the base plates are connected firmly with the butterfly screws.
Fig 4
j.
Place the power cord into the clip slots of the base plate.
k.
Carefully turn fan upright onto its base and plug into the mains supply.
l.
Fit batteries into the remote control & keep safe for use when required.
3
4