NS BIKES SYNONYM RC, Техническое руководство, Страница: 13 / 20

13
SPARE PARTS
PARTS:
- SP-079: NS axle 148x12 174L
- SP-140: Derailleur hanger (w/bolt)
- SP-175: Internal routing
- SP-176: Bearing kit
- SP-177: Shock mount bolts (3pcs)
- SP-178: Main pivot axle & bolt
- SP-179: Seatstay yoke parts
- SP-180: Arm bolts (main side bolts)
- SP-181 Rocker arm (black)
- SP-182 Rocker arm (ORB brown)
ACCESORIES:
- SP-145: ChainStay Slapper protector
SUSPENSION SETTINGS
Suspension settings are a matter of personal preference. Some riders like it plush, some like it firm.
However here are some suggestions of shock settings that you can use as basic guidelines.
Typically, the SYNONYM should run with about 20% to 30% sag. To measure sag, push the
bottom-out bumper up the shock shaft until it meets the body of the shock. Gently stand up on the
pedals with all your weight on the bike (fully kitted up with body armour, helmet, hydration pack, etc.
– it’s important to make the situation as ‘real world’ as possible to give you the most accurate
results) and note how far the bumper displaces
REAR WHEEL MOUNTING INSTRUCTION
The SYNONYM frame is compatible with 148x12 thru-axle hubs. For proper rear wheel installation
please follow the instructions:
- make sure the wheel is aligned and the disc sits properly in the brake caliper
- put the wheel into the dropouts with the chain set up correctly on the cassette
- put the 12mm axle through and tighten properly with 6mm allen key