User Instructions
Installation
1. Remove the frame from packaging.
Page 1
Suitability
The Cordless Kettle Tipper is suitable for
most jug kettles of about 2 to 3 pints.
Small jug kettles of about 1 pint capacity
are unsuitable.
Please ensure these instructions are
fully read and understood before
use. Retain in a safe place for future
reference.
NRS /M00122UI/Iss1. Feb. 2008
CORDLESS KETTLE TIPPER
M00122
Congratulations on your new Cordless
Kettle Tipper. Used properly it should give
you years of trouble free service, taking
the strain off your wrists, and avoiding the
need to lift heavy kettles full of water
2. Fit the tilt plate into the frame.
Front
Back
The tilt plate stopper is
position behind the bar
across the base of the frame
3. Secure kettle base onto tilt plate.
Clamp kettle base in place with
the 4 plastic brackets by
tightening the wing nuts on the
underside of the tilt plate
