www.nationalrailwaysupply.com
1-800-357-3572
3
38542D
Figure 4.1
Figure 4.2
Rack Mounting
The charger can be mounted to a
standard
Electronic
Industries
Association
(EIA) 19” (483mm) rack
system using the fasteners provided by
the rack manufacturer. The horizontal
spacing of the vertical rows of holes is
specified
by EIA-310 at 18-
5/16”
(18.312)(465.1mm). The mounting
flanges are configured for an EIA 19”
(483mm) rack for a forward mounting
arrangement (note: the width from the
outer edge fo one mounting flange to
the outer edge of the other mounting
flange is 19-
15/16”). Fasteners to
match the thread of the rack should be
used in all 7 rack mounting horizontal
slots on each of the 2 mounting flanges
(14 rack mounting slots total) to
maximize the mounting integrity. The
fasteners should be torqued to 22 inch-
pounds. The dimensions and pattern of
the mounting flange rack mounting slots
is shown in figures 4.2 and 4.3
Figure 4.3
