Manufactured for
Nottingham Rehab Supplies
Clinitron House, Excelsior Road,
Ashby Park, Ashby de la Zouch,
Leicestershire, LE65 1JG
United Kingdom
Tel: 0845 120 4522
Int’l: +44 (0) 1530 418378
Fax: 0845 121 8112
Email: [email protected]
This product is from a range of over 3000 daily
living aids available from Nottingham Rehab
Supplies. To view the full range visit
www.nrs-uk.co.uk
or request a catalogue
from the above number.
www.nrs-uk.co.uk
UI/M48477/M48489/07/11/Iss3
Fitting Instructions – Continued
4 - With the stool in an upright position fix the
armrests to the product. This is done by
pressing the spring clips flat to the tube, to
allow the tube to enter the seat tube. Keep
pushing the armrest tube into the seat until
both clips “Click” into position.
Note: There is a left hand and right hand arm
rest, when assembled they should align to the
slope of the seat (see diagram 3)
5 – To fix the Backrest (M48477 only) use the
same method as described for the armrests.
The product is now fully assembled.
Note: If required the product can be used
without armrests or backrest. If this
configuration is required, the ends of the tube
should be sealed with the end caps supplied,
to prevent water ingress.
Height Adjustment
To adjust the stool to the desired height, firstly
remove the plastic E clips connecting the
stools' legs and leg extensions. Slide the leg
extensions to the required position ensuring
that all legs are equal in height. Replace the
plastic clips ensuring that each clip is fully
connected.
Using the Perching Stool
Ensure the stool is placed on a level, even
surface. The stool can be used in a shower,
bathroom or kitchen.
Safety Precautions
•
Do not exceed the maximum user weight
limit.
•
Inspect at regular intervals for wear and
damage.
•
Check seat for damage or tearing.
•
Do not use if rubber feet are damaged.
•
Periodically check the legs for excess
movement
•
Inspect regularly to ensure Hand Nuts on
all legs are fully tightened
Cleaning Instructions
Clean regularly, use a general purpose, neutral
detergent and warm water. Do not use an
abrasive detergent, cleaner or cloth to clean or
dry this product.
To disinfect, wipe with a mild chloride
disinfectant (solution of 1000 parts per million).
LEG
ASSEMBLY
HAND NUT
SEAT ASSEMBLY
SEAT TUBE
ALIGNMENT
GROOVE
DIAGRAM - 2
DIAGRAM - 3
•
•
THE ANGLE OF THE
ARMREST AND THE
SEAT SHOULD BE
THE SAME
Page 2
