User Instructions
Rise Easy Bed Aid
G21808
– Single 762mm (30”) to 1220mm (48”)
G21819
– Double1372mm (54”) to 1525mm (60”)
Intended Use
The Rise Easy Bed Aid is designed to assist
the user in rising from, or sitting up in bed,
without interfering with bed clothes. It is
available in two sizes and is suitable for most
beds including profiling beds. It can be used
on either the left or right hand side of the bed.
Safety Precautions
Do not place obstructions (for example a
bedside cabinet) adjacent to the bed rail. It is
important that the arm is free to be moved
away from the bed.
Do not use if feet of bed are too large to fit
onto base plate pads.
It is recommended that this device is only
used for clients up to 127Kg (20st).
MANUAL HANDLING GUIDANCE
During installation, it is necessary to lift the
bed head onto the bed rail base plates.
Please ensure that the person(s) installing the
device is capable of doing this operation
safely using the correct manual handling
techniques and employ caution when lifting
the bed.
Diagram 1
Assembly & Installation Instructions
1 - Remove all parts from the packaging.
Check all parts are undamaged.
2
– Ensuring there are no obstructions
(E.g. Bed side cabinet) on the side which the
client will exit the bed; move the bed
approximately 300mm (12”) from the wall
3.
– Place the 2 base plate sections on the
floor and p
ush both silver coloured connecting
rods into both tubes on base plates to the bed size
required. Note: DO NOT PULL TUBE PAST THE
WARNING DIMPLES
4 - Slide assembly behind the head section of
the bed and align base plates to bed
castors/feet.
5 - Lift the bed and slide assembly under the
castors/feet of the bed. Lower bed onto the
base plate ensuring the castors/feet sit onto
the base plate. Carefully move the bed/Base
plate assembly back to the wall.
6
– The hand rail may now be fitted on the
appropriate side of the bed. Slide the handrail
over the location tube and push down until it
hits the location stop pin.
7. Check that the bed rail feels secure and
can be swung away from the bed.
General Safety Warning
Please ensure these instructions are
fully read and implemented. Failure to
do so may result in injury to the user.
Retain in a safe place for future
reference.
Maximum
User Weight
