2
choose the correct width to suit your bath. Please refer to
the instruction for correct
fi
tting
5.1 Assembling to a bath
Place the seat onto
fl
at bath ledges.
IMPORTANT: At least 50mm (2”) of ALL the mounting
frame feet (C) must rest on the
fl
at sides of the bath
If necessary extend the mounting frame by removing the
fi
xing e-clips (D), adjusting the width of the frame so that
it is closest to the external width of the bath and replacing
the clips, check they are all replaced and secured
correctly.
Secure the mounting frame using the clamps (E) under
the seat by turning the hand wheels until secure against
the walls of the bath on both sides. Check the frame is
secure, but do not over tighten as this could damage the
bath. The bath seat is now ready for use
Safety Note:
If the Seat is removed and replaced over
the bath, it is important the
fi
xing clamps are re-adjusted
and tightened as detailed above
6. IN
USE
Raise the locking handle (F) and rotate until the seat is
facing the user, lower the handle and lock into position.
Transfer user into seat. Raise locking handle and rotate
slowly into bath, taking care when raising legs over the
side of the bath.
Ensure seat is locked into position and no longer rotates
freely before commencing washing
7. MAINTENANCE
It is recommended the product is wiped down after use,
or at regular intervals to maintain the quality
fi
nish – see
cleaning instructions
Inspect the product at regular intervals, pay particular
attention to the swivel and lock movement.
Check all
fi
xings, ensure they are secure.
Check all parts for signs of wear or damage.
If the product is not moving freely or you suspect a fault
do not use – contact your dealer immediately
8. CLEANING
INSTRUCTIONS.
The swivel Bath seat has a powder coated aluminium
frame with a moulded polypropylene seat. Clean all parts
regularly, wiping down with a mild detergent /disinfectant
solution. Avoid the use of abrasive cloths and cleaners,
as they can damage plastic parts.
Inspect the product regularly for signs of wear or damage
9. PRODUCT
DISPOSAL
This product must be thoroughly cleaned/sterilised prior
to disposal.
This product is manufactured from metal & plastic
and
can be disposed of through Local Authority Household
Waste and Recycling Centres or through Local Trade
Waste Collectors.
10. PRODUCT GUARANTEE
NRS Healthcare guarantee this product for a period of
12 months, from the date of purchase, against faulty
materials and workmanship.
This guarantee does not cover; fair wear & tear, abuse,
misuse, interference or tampering with any part of the
product.
Any guarantee issued by NRS Healthcare does not a
ff
ect
your statutory rights.
If you have any problems with our products, please
contact us at the address below.
If you have experienced an injury, contact us but feel
free to contact the Medical and Healthcare products
Regulatory Agency at:
[email protected]
NRS HEALTHCARE
Sherwood House,
Cartwright Way, Forest Business Park, Bardon
Hill, Coalville, Leicestershire, LE67 1UB, UK.
NRS HEALTHCARE
4C Altona Road, Blaris
Industrial Estate, Lisburn, Co Antrim,
Northern Ireland BT27 5QB
Tel: Customer Services: 0345 121 8111
Email: [email protected]
NRS Healthcare
is a leading supplier of community equipment and daily living aids.
Please visit one of our websites to view our full range of products:
www.healthcarepro.co.uk or www.completecareshop.co.uk
N72838-UI-3 23-07-2021
