Product Care: Cleaning General
·
To help reduce the risk of infection
as well as
keeping the commode clean and odour
free, it
is recommended a sanitising spray or
cloth is used to wipe down the potty,
commode seat and arms after every use.
·
Carers should always wear protective gloves
when carrying out these tasks.
Product Care: Cleaning the Commode Potty
·
After every use rinse the potty thoroughly with
warm water, ensure there is no residue, clean
with a mild disinfectant.
·
Use of sanitising sprays or cloths is
recommended
Product Care: Cleaning the Commode Frame
·
Clean the frame regularly, at least on a weekly
basis, with a mild disinfectant solution.
·
This product is also suitable to be cleaned in
commercial high temperature washing
machines.
·
Ensure all parts are dried thoroughly before
re-use.
Product Care: Maintenance
·
Inspect the product at regular intervals for
signs of wear, damage or possible faults. If
any are found or are suspected, remove from
use immediately and contact your supplier for
advice.
The Extra Wide Commode Range is part of a
range of over 3000 daily living aids available from
NRS Healthcare. To view all of our products
please visit our website:
www.nrs-uk.co.uk
or request a catalogue from the number below.
NRS Healthcare
Sherwood House, Cartwright Way
Forest Business Park, Bardon Hill,
Coalville, Leicestershire, LE67 1UB, UK
Tel: 0845 120 4522
Email: [email protected]
www.nrs-uk.co.uk
UI /N10699/N10705/N10717/05/14/Iss1
Safety Precautions
·
Ensure an even floor surface to avoid rocking. All
ferrules must be in contact with the floor at all
times.
·
Do not exceed the maximum user weight limit.
·
It is recommended a risk assessment is carried
out by a healthcare professional with regard to the
environment and capabilities of the user.
·
Inspect at regular intervals for damage or
excessive wear, if found, or suspected, remove
from use immediately and contact your supplier.
·
Always dispose of the potty contents into a toilet
or sluice.
Instructions for use
·
For N10705 and N10717 only: to manoeuvre into
position, tilt onto the wheels by lifting the armrest
and tilting the commode upwards so the wheels
are in contact with the floor and wheel into
position.
·
Set the product to the correct height for the client
by removing the e-clips which secure the legs and
slide them to the required height, align the holes in
the leg and frame and secure with the e-clips.
Ensure all legs are at the same height.
·
If the product is to be used over a toilet, as shown
below, remove the backrest and ensure the height
is set so all parts of the commode clear the toilet.
You may need to remove the existing toilet seat
also. Ensure the aperture of the commode seat is
positioned centrally over the toilet bowl.
·
N10717 Removable arm version: to remove the
arm, unclip the two e-clips which secure the arm
and pull gently upwards. When replacing ensure
both e-clips are re-fitted, and the arm is stable.
·
When using the potty, slide fully into position from
the front. To help contain odours fit the potty lid
when transporting.
·
Always dispose of the potty contents into a toilet
or sluice.
Toilet Fitting
