NRI v2 eagle Скачать руководство пользователя страница 31

Страница: 31 / 57

BA_v2_eagle_parallel_EN_1-0

uncTion

5.9

Manipulation detection (option)

In case manipulation is detected while a coin is being accepted the coin validator emits a foul

signal and a string signal as an option.

5.9.1

Foul signal (only v² eagle BACTA)

The coin validator reports a manipulation of the acceptance gate by transmitting a foul signal

(pulse length: at least 600

ms) via all signal lines in the standard mode (in the binary mode: via

all signal lines except for the strobe line). Coin acceptance is inhibited.

5.9.2

String recognition

To ensure that no coins suspended from a string can be inserted into the coin validator or that

the acceptance gate cannot otherwise be tampered with, the coin validator can be equipped

with an optical string sensor (cannot be retrofitted) in the acceptance area which recognizes

both tight and loose strings.

The construction of the acceptance gate (dismounted in figure) makes

the string go through the light beam between the two optical

sensors. If the acceptance gate is completely closed, the string

changes the light signal. If the acceptance gate is slightly

open (tight string), the light beam is directly interrupted by

flag on the acceptance gate.

If the sensor recognizes a string, coin signal line 1 or 6

of the BDTA interface sends a string signal, or the BACTA

interface sends a foul signal

(cf. Chap. 5.9.1 Foul signal (only v² eagle

BACTA), p. 31)

to the machine, and the coin is not accepted.

At first, coin acceptance is inhibited for 30 seconds. If the

string is not removed within this time period and the sen-

sor continues to recognize it, coin acceptance remains

inhibited and in addition all "jammed coins" are automatically released.

Whether in case of the BDTA version the string signal is transmitted via coin signal line 1 or 6 is

determined by customized factory programming

(cf. Chap. 10.2.1 BDTA interface, p. 46)

Sensitivity of the string sensor

To enable faster testing of the string sensor for functioning, coin acceptance is

not inhibited when diagnosis is performed. When the string sensor is activated

only a string signal is transmitted.

Fig. 11:

Section – string recognition

Содержание v2 eagle


























































Результаты поиска

Содержание v2 eagle

Отзывы:

Похожие инструкции для v2 eagle

Бренды по названию

Популярные бренды

NRI v2 eagle, Руководство по эксплуатации

Результаты поиска

Содержание v2 eagle

Отзывы:

Похожие инструкции для v2 eagle

Бренды по названию

Популярные бренды