O
PERATION
G-18.mft with vending machine control system
34
National Rejectors, Inc. GmbH, Buxtehude
7
Operation
In this chapter you will find out how to carry out functions and settings,
directly on the coin validator using the operating elements (switching blocks
and LEDs), rather than with additional tools.
• Inhibit coins
• Select memory block
• Disable price and test switches/button
• Display battery voltage
• Teach coin channels in teach mode (optional)
Inhibiting coins
Using the first six DIL switches of the two upper switching blocks S1 and S2,
each of the 12 coin channels or each coin type assigned to a specific coin
channel can be inhibited individually, i.e. this coin type is not accepted for
payment on the vending machine.
Please refer to the label of the device to see which coin type has been
assigned to which coin channel by the manufacturer.
This assignment can be reset at any time using the NRI software
WinEMP or PalmEMP.
If all coin types are to be accepted for payment at the vending machine, DIL
switches 1–6 of the two upper switching blocks S1 and S2 are in the lower
OFF position. If you want to inhibit a coin channel, you only need to set the
respective DIL switch upward to ON.
The 12 DIL switches inhibit the following coin channels:
