NRI G-13.mft MDB/S1, Руководство по эксплуатации

Страница: 59 / 65

G-13.mft MDB/S1 T
ECHNICAL DATA
59
National Rejectors, Inc. GmbH, Buxtehude
Configuration software
To be able to react as quickly as possible to new false coins, in the workshop
or on site, and enable you to make your individual adjustments, the coin
validator can be connected to:
• The NRI PC programming station consisting of
– Configuration and diagnostics software "WinEMP", including card
reader und chip card (ordering code: 20119 for basic module and
20169 for additional module)
– Tester G-19.0641 (ordering code 12922)
• The NRI Palm application "PalmEMP2", which is available on the NRI
homepage. To be able to connect a Palm handheld m125 to the coin
validator, you need a dongle with the ordering code 23760; for an m105,
a dongle with the ordering code 23761. If you want to perform data block
downloads with the help of a Palm handheld, you need the WinEMP
software (see above) with PalmEMP2 download rights (ordering code
23649), which are saved on the WinEMP chip card.
You can also use a 9-pole D-SUB plug (ordering code 23764) to
connect the Palm handheld via the universal dongle. However, the
Palm handheld must be equipped with an interface that can be
connected to the serial HotSync cable (available with Palm
TM ).
For further details about the individual PalmEMP2 dongles, please
refer to the NRI homepage (www.nri.de).
For details on which settings can be made with the help of WinEMP and
PalmEMP2, please see Chap. 8 "Which functions can be set using WinEMP/
PalmEMP2?" For details on how to carry out these settings, please refer to
the separate software instructions.