NRI Currenza F2 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 51

NRI Currenza F2 Скачать руководство пользователя страница 49

49

G

LOSSARY

National Rejectors, Inc. GmbH, Buxtehude

Coin impulse number

Every coin accepted by the coin validator passes on an
impulse to the machine control system via the appropriate

→

coin signal line

. An impulse tells the machine control system

that a coin has been accepted. In principle, 255 impulses per
coin can be assigned to the

→

coin channel

that is assigned

to a coin. However, it only makes sense to assign more than
1 if the machine control does not have sufficient coin signal
lines  and  if  higher-value  coins  have  to  be  simulated  by  a
multiple  of  coin  impulses,  i.e.  when  e.g.  a  2-euro  coin  is
inserted,  4 coin  impulses  would  be  sent  to  the  machine
control via the coin signal line allocated to the 50-cent coin.

Coin properties

Coin properties which are measured when a coin is inserted
into the coin validator. These are e.g. material, thickness,
volume, minting, diameter, mass, hardness, etc.

Coin signal line

Coin signal lines are used to transmit the

→

coin value

of a

→

coin type

from the coin validator with parallel interface to

the machine.
For information about the coin signal line of the

→

SGI

model

see

→

credit line.

Coin type

One coin type includes all coins for which the

→

coin

properties

agree.

Coin value

The value of a

→

coin type

that is transmitted to the machine

in case of a parallel interface as (a) coin impulse(s) via

→

coin signal lines

and in case of a ccTalk interface using

ccTalk coin type 1–16 and coin ID.

Common inhibit signal

With the parallel standard model the machine control system

line

can block acceptance of all coins using this signal line. The
validator will no longer accept any coins.
For information about common inhibit of the

→

SGI

model

see

→

inhibit line.

Credit line

The

→

SGI

coin validator uses the credit line to transmit the

→

coin value

or a

→

coin type

to the machine.

For information about the coin line of the parallel standard
model see

→

coin signal line.

«
...
47
48
49
50
51
»

Содержание Currenza F2




















































Отзывы:

Нет отзывов