NPZ TAL-75R, Инструкция по эксплуатации

Страница: 9 / 21

9
Remove the telescope from its
packaging. Release the clamp
screw (), shift the telescope tube
to the middle position and secure it
with the screw.
Loosen the handle on the latitude
mount (), turn the tripod in
operation position and secure it.
Extend the tripod and place the
telescope on the flat hard surface.
Screw the axis with counterweights (3).
When using the pillar C57, unfasten
stopper (4), unscrew handwheel (6)
and take off the tripod (5).
Remove the pillar () and legs ()
from their packaging and with the
help of captive screws attach three
legs to the foot-end of the pillar.
The legs should bear against the
pillar. Swing of the pillar in its legs
is unacceptable.
Put the hub (4) of the pillar ()
on the tube (3), tighten the
handwheel (5) and stopper (6),
insert the mount into the pillar ()
and fix it by the handle (7).
Assembling
of telescope




Preparation for observations

