NPower 457300 Скачать руководство пользователя страница 10

9.

shut down when the voltage dropped to the range of 10.2~10.8V DC. The red 
LED indicator illuminates, indicating a fault. This protects the battery from 
being over-discharged. Turn off any devices that the inverter is powering.
When input voltage rose to 11.7V~12.3V DC, inverter restores normal. 

        

Caution!

Most vehicle batteries are designed to provide short period of very high 
current for starting the engine. They are not designed for a constant “deep 
discharge”. Constantly operating the unit from a vehicle battery until the low 
voltage shut off will affect the life of the battery. If you are operating electrical 
products for extended periods of time, you should consider connecting the 
unit to a separate deep discharge battery. 
Should a defective battery charging system cause the battery voltage to rise 
to the range of 15.0V~16.0VDC, the inverter automatically shuts down; and 
the red LED lights.

        

Caution

Although the inverter incorporates protection against over-voltage, it 
may still be damaged if the input voltage exceeds 16 volts.

If an AC product rated higher than 200W (or which draws excessive surge 
power) is connected, the inverter will shut down. The red LED light will light.
The unit will shut down automatically if the inverter exceeds a safe operating 
temperature due to insufficient ventilation or a high-temperature environment; 
and the red LED indicator lights.
The cooling fan is designed to operate only when output power is greater 
than approximately 75W. 

Battery Operating Time

Operating time will vary depending on the charge level of the battery, its 
capacity and the power level drawn by the particular AC load. With a typical 

Содержание 457300
















Отзывы: