7
4
Select:
Button displays Backup Power System battery level (%) or
output power (W)
5
LED Screen:
indicates charging status, power system battery level
(%). The screen also shows error codes to aid troubleshooting.
6
Fault:
LED illuminates red when fault condition exists
7
AC power cord
8
Emergency LED light
: Illuminates the rear AC outlets when a
power outage occurs
9
Five 120 V AC outlets:
For powering office equipment and
household appliances that draw a maximum total of 400 W. All
outlets are surge protected and backed up by the Backup Power
System internal battery.
10
15 A circuit breaker:
Protects Backup Power System’s AC outlets
and your applications from overload conditions.
11
5V 500mA USB port
12
USB indicator
13
Push button for 3 seconds to activate the USB port
INSTALLATION AND OPERATION
WARNING:
Shock Hazard
If the input plug is connected and utility power is present, the outlets will be energized. The front
panel ON/OFF button will not turn these outlets off.
Important:
Unit should only be used and stored in a temperature-controlled, indoor area and
placed away from direct sunlight, moisture or conductive contaminants. Allow a minimum of 3in.
(7.5 cm) of space around the unit for ventilation.
Important: this Backup Power System
must be charged immediately before storage or
use.
This will protect the battery inside from damage and will ensure extended usage run time.
A complete charge may take up to 20 hours when recharged from a 120V AC wall outlet.
CAUTION
·
Do not plug surge-protected power bars into the unit’s 120V AC outlets
·
Do not connect an AC power source to the 120V AC outlets.
·
Do not connect the unit’s AC power cord to its 120V AC outlets.
To install the Backup Power System:
1. Plug the power cord directly into a wall outlet (not into a surge protector, power strip, or
power bar).
2. Connect your AC-powered devices or small household appliances to one or more of the five
