EXT-16DX User Manual
_______________________________________________________________________________________________________________
___________________________________________________________________________
version 1.3
page 10
Figure 6: headstage assembly with NeuroNexus electrode
Figure 7: side view of the headstage assembly with cables connected
Important
: The cables must be connected so that the white labels fit!
Figure 8 shows a schematic of the top view of the headstage assembly with the connector for
the test array or the NeuroNexus electrode, respectively.
The test array is for testing purposes only. It consists of resistors (1 M
) mimics the unit of
the NeuroNexus electrode. The two plugs (0.5 mm diameter) next to the connector of the
cable are labeled by a point (orientation label). They provide system ground and should be
used to ground the preparation.
Figure 8: positioning of the test array on top of the headstage assembly (top view)
