NPD BOSS PRO-128, Руководство пользователя

Страница: 4 / 14

4
Assembly
1. Plug charger into an AC receptacle, snap in battery. The battery will charge in approximately
1.5 hours. Wait until the green light on the charger turns on, showing the battery is completely charged.
2. Install and adjust the shoulder straps for a comfortable fit. (Some models will not have straps)
3. Select your spraying tip, insert screen filter and thread onto the 11/16 brass adaptor. Tips should
be hand tightened only to provide a seal. Internal tip O Rings provide a
“No Wrenches Required” seal. You can also connect directly to the Trigger Gun
4. Connect the assembled Trigger Gun to the output hose from the sprayer
5. To assemble the Quick Disconnects, pull back the Female Q collar while pushing in the Male Plug.