NPD 3900076 Скачать руководство пользователя страница 2

Страница: 2 / 2

Flip the structure formed in Step 2 upside down and place it

along the edge of an elevated level surface to get ready for

assembling the front legs. Fit a front leg

③

into the slot in the

front of the seat. Make sure the curved face is towards inner

side as elaborated in diagram below. Repeat this for the other

front leg

③

Fit a spring washer B to a bolt A followed by a ﬂat washer C.

Insert the bolt into a hole and tighten it with your hand until it is

ﬁnger-tight. Repeat this for the other hole and then repeat the

process for the other leg

Place the loosely assembled chair in its desired location. Apply

gentle downward pressure on the seat to eliminate rocking and

ensure the chair is level. Once the chair is leveled, tighten all

Содержание 3900076

Страница 1: ...o that the bottom faces you Remove the bottom fabric attached by Velcro to get ready for assembly Place the backrest on a at surface Align the seat with the backrest making sure the bolt holes overlap...

Страница 2: ...d in diagram below Repeat this for the other front leg Fit a spring washer B to a bolt A followed by a at washer C Insert the bolt into a hole and tighten it with your hand until it is nger tight Repe...