NPCatb M 02-01, Руководство по эксплуатации

Страница: 3 / 13

3
ATTENTION!
Read this instruction manual carefully before switching on the gas analyzer!
This manual explains how to use the gas analyzer toxic and fuel gases М 02-01,
consider of operating principles and technical characteristics for correct appliance
1 Purpose
1.1 Analyzer M 02-01 are designed for rapid automatic continuous measuring
methane concentrations, oxygen concentration, carbon monoxide concentration, carbon
dioxide concentration, the hydrogen sulfide concentration in the atmosphere for general-
purpose object class V-1a, and in underground mines, including dangerous by gas or dust
and sudden outburst (blast).
1.2 Type of gas analyzer - portable, automatic, multi-channel, for individual use.
1.3 Operating conditions of gas analyzers:
- the range of ambient temperature from – 30 to + 40 °C, briefly in the ranges from
30-40 °C below zero and 40-50 ° C above zero;
- relative humidity up to 100 % at + 35 °C;
- the range of atmospheric pressure from 87.8 to 119.7 kPa (from 660 to 900 mm
Hg);
- the speed of the gas air flow to 8 m/s;
- vibration with frequency (5-35) Hz and amplitude not more than 0.35 mm.
1.4 Gas analyzers provide:
- continuous measurement and digital indication of the monitored component;
- indication and signaling (sound and light intermittent signals) of exceeding the
established threshold values for the concentration of methane (or methane-hydrogen
mixture), carbon monoxide, carbon dioxide, hydrogen sulfide, oxygen;
- continuous automatic recording of information about the concentration of the
measured component and the parameters of the gas analyzer operation in real time in the
archival memory (the function of the "black box");
- fixation of the results of measurements of the concentration of the monitored
component at the command of the operator (immediately or with a delay), storing them in
the memory of the gas analyzer;
- sampling and indication of the fixed values from the gas analyzer memory;
- transmission of information stored in the "black box" mode or separately by the
operator's command, via the infrared port to the personal computer;
- indication of the current date and time;
- indication of the ambient temperature;
- indication of atmospheric pressure;
- fault indication;
- charge management, indication and signaling about the discharge of the battery;