Nowy Styl SO-one LP11, Руководство по эксплуатации

Страница: 5 / 12

EN
In order to simplify the handling of SO-one,
we have created a brief summary of the
functions for you. Warining ! All regulations
should be provided while sitting.
1
Mechanism
Pull down the lever located on the left side
underneath the seat to lock the tilt angle of
the backrest. Pull up the lever to release the
synchronous mechanism, to achieve the
dynamic sitting effec.
Warning! Dynamic seating,
with open mechanism is optimal for user’s health.
2
Seat height adjustment
For continuous adjustment of seat height pull
up the lever located on the right-hand side
underneath the seat.
Please note: Pneumatic lifts can only be installed
and serviced by trained personel.
3
Height adjustable backrest
The backrest will engage, means by the EasiLift,
at the required height setting when pushed
upwards. To re-adjust the backrest to a lower
position, push the backrest to the highest
position and guide it down to the engaging
position at the bottom.
4
Seat depth adjustment (option)
In order to adjust the seat depth press the lever
located on the left side of the seat. Then move
the seat to the desired position and release the
lever. The seat will be locked in this position.
5 Seat inclination adjustment (option)
In order to set the negative seat tilt turn twice
the knob located on the left side underneath the
seat to the front. In order to lock the seat in this
position turn this knob once to the back. In order
to switch off this function turn it to the front to
the last position.
6
Weight adjustment
To adjust backrest tilt force turn the knob located
on the right hand side beneath the seat clockwise
(backrest tilt force will increase) or counter-
clockwise (backrest tilt force will decrease).
7
Armrest adjustment
2-D-Armrest (option): To adjust the height of the
armrests press the button on the outside of the
armrest. To adjust the armrest width open the
locking lever underneath the armrest, move the
armrest into the required position and tighten
the lever.
4-D-Armrest (option):
To adjust the height of
the armrests press the button on the outside of
the armrest. To adjust the armrest width open
the locking lever underneath the armrest, move
the armrest into the required position and tighten
the lever. To change the angle of armrest pad
turn the pad to the inside or to the outside, into
the desired position. To simply adjust the depth
of the armrest pad move the pad forward or
backward into the desired position.
8
Depth adjustable lumbar support (option)
If your chair has a depth-adjustable lumbar
support: You can set the depth of the lumbar
support by turning the knob on the backside of
the backrest.
9
Height adjustable and tiltable neckrest
(option)
You can adjust the height of the neckrest by
moving it upwards or downwards. To set the
angle, move the pad to the required position.
10
Castors
Castors compliant with
DIN EN 12 5 29
– with
load-controlled braking mechanism.
For soft floors: one colour of castors across the
entire surface.
For hard floors:
the soft castor cover is a
different colour.
Cleaning
Upholstery parts can be cleaned by means of the
appropriate commercial detergents for
upholstery.
Considerations for use
Only use this office swivel chair conventionally
by respecting the general duty of care. Danger of
accident exists in the case of use as an ascent
assistance, sitting on armrests or other improper
use.