Novus NVR-7716P16-H2, Краткое руководство пользователя

Страница: 8 / 44

NVR-7716P16- H2 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
8
2.4. Connecting monitor
This product supports following interfaces for main monitor: HDMI, VGA.
For HDMI and VGA outputs following resolutions are supported: 800x600, 1024x768, 1280x720
1280x1024, 1366x768, 1440x900, 1920x1080, 3840x2160
After changing resolution you have to confirm it by clicking YES. In case of monitor does not display
anything please wait 8 seconds, then previous resolution will be restored.
2.5. Connecting camera and Network
NVRs have built-in 16 PoE ports RJ-45 with PoE support, which can be used for connecting cameras.
Please notice that the Ethernet connection is effective within 100 meter distance. To connect IP
cameras please connect cables like on image and follow the described below.

In case of adding IP cameras to built-in PoE switch, you don not have to set up any parameters
of camera. After connecting camera to RJ45 port it would be automatically powered, discovered
in network and connected to NVR.

In case of connecting cameras by using external switch you have to configure its network
settings (according to NVR LAN setting) like it is described in Camera User Manual.
Note:
NVR saves password automatically. If you provide unique password while adding one camera it
would be automatically used for connecting with other cameras.
Note:
To ensure recording stability from an overloaded network traffic, or unauthorised access, it is
strongly recommended to create separate network secured by router firewall from the user network.
If you use a switch to connect additional cameras it is recommended not to exceed 60% of the
maximum throughput of the network interface. When connecting more than 6 cameras via a external
switch we recommend you to use a 1000 Mbit switch
STARTING THE DEVICE
ETHERNET SWITCH
INTERNET
PC
COMPUTER
IP CAMERAS
NOVUS NVR
IP CAMERAS