Novus NVR-5836, Руководство пользователя

Страница: 11 / 44

NVR- 5836 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
11
3.3. System operations
To start NVR plug power cable and switch on power button. The power led turns on. After booting,
the video output default to multi-window output mode.
To manipulate or access menus of the NVR, you should log in first. Move cursor to the top or click
the right key of mouse to bring up MAIN MENU and select START icon
Next click the LOGIN icon to pop out the login menu:
Note:
If the currently selected NVR menu language is not as expected, to change it, please follow the
procedure described in chapter 4.4 of this manual.
Select User and enter the password . Use the virtual keyboard to enter the password and confirm with
Login button.
Default login is “admin” / no password. For safety reasons, it is recommended to change default
user name and password.
In order to shutdown NVR you should move cursor to the top or click the right key of mouse and
select START icon . Next click the POWER OFF icon . After that use button at front or rear
panel turn off the power.
In order to reboot NVR you should move cursor to the top or click the right key of mouse and select
START icon . Next click the REBOOT icon . After NVR will boot again you should log in.
To prevent unauthorized access, it is recommended to log out when you leave the screen. To do that
move cursor to the top or click the right key of mouse and select START icon . Next click the
LOGOUT icon .
Note:
When user is not login or has limited rights all inactive icon and menus are greyed out.
CAUTION
:
If you turn off the system in an abnormal manner such as removing the power cord while the
system is working, the disk will acquire or increase the numbers of bad sectors, causing data
loss and shortened life cycle of the disk.
NVR OPERATING