Novus NVR-5304POE, Руководство пользователя

Страница: 25 / 62

NVR-
5304POE User’s manual ver.1.1
All rights reserved © AAT Holding sp. z o.o.
25
NVR CONFIGURATION
5. NVR CONFIGURATION
Setting menu allow to configure various NVRs parameters.
5.1. Device menu allows to check NVR information and configure the settings of date/time, system
management, and peripheral device.
5.1.1. Device Info - check and modify the basic information of the NVR
Following function are available:

Device name - set device name

Device ID - set up device unique number for remote controller

Record Replace - if set to REPLACE, the existing data will be overwritten by newly recording
data if the HDD free storage space is exhausted. If the option is set to STOP RECORD and the
HDD is full, NVR will stop recording and notify via beep depending on the ALARM setting.

Record Time - if ENABLE is on the available records will be limited by provided amount of
hours.

Panel Version - define front panel hardware version, do not modify it.

RS 485 - set up functionality of RS485 interface

Device info: contains current system information: Serial number, Channel, Alarm input, Alarm
output, HDD number

Video Format - switch between PAL and NTSC

Stream Type - depending on used cameras you have to chose correct mode from the list
For eg. in mode 2x[1920*1080] + 2x[1280*720] + sub[960*576] + 1Ref + 4Play
Channel 1 and 2 support 1920*1080, channel 3 and 4 support 1280*720 , channel 1-4 sub
streams support 960*576 resolution. 4Play means that there is possible to playback for 4
channels at once. 1Ref is internal buffer capacity.