All rights reserved © AAT Holding sp. z o.o.
2
NVPT-111VTS-II/NVPT-111VT-II/NVPT-111VTP-II user's manual, ver. 1.0
INFORMACJE
IMPORTANT SAFEGUARDS AND WARNINGS
EMC (2004/108/EC) and LVD (2006/95/EC ) Directives
CE Marking
Our products are manufactured to comply with requirements of following directives and
national regulations implementing the directives:
•
Electromagnetic compatibility EMC 2004/108/EC.
•
Low voltage LVD 2006/95/EC with further amendment. The Directive applies
to electrical equipment designed for use with a voltage rating of between
50VAC and 1000VAC as well as 75VDC and 1500VDC.
WEEE Directive 2002/96/EC
Information on Disposal for Users of Waste Electrical and Electronic
Equipment
This appliance is marked according to the European Directive on Waste
Electrical and Electronic Equipment (2002/96/EC) and further amendments. By
ensuring this product is disposed of correctly, you will help to prevent potential
negative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
The symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. It shall be handed over to
the applicable collection point for the waste electrical and electronic equipment for
recycling purpose. For more information about recycling of this product, please contact
your local authorities, your household waste disposal service or the shop where you
purchased the product.
RoHS Directive 2002/95/EC
Concerning for human health protection and friendly environment, we assure
that our products falling under RoHS Directive regulations, regarding the restriction of
the use of hazardous substances in electrical and electronic equipment, were
designed and manufactured in compliance with mentioned regulation. Simultaneously,
we claim that our products were tested and do not contain hazardous substances
exceeding limits which could have negative impact on human health or natural
environment.
Information
The device, as a part of professional CCTV system used for surveillance and control,
is not designed for self installation in households by individuals without technical
knowledge.
The manufacturer is not responsible for defects and damages resulted from improper
or inconsistent with user’s manual installation of the device in the system.
