Novus NVIP-6DN5022H/IRH-1P, Руководство пользователя

Страница: 9 / 48

NVIP-6DN5022H/IRH- 1P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding S.A.
9
1.4. Package contents
After you open the package make sure that the following elements are inside:

IP camera

230 VAC / 12 VDC power supply

Accessories bag

Short version of user’s manual

CD containing manual and software
If any of this elements has been damaged during transport, pack all the elements back into the original
box and contact your supplier for further assistance.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
3. INSTALLATION
3.1 Connecting Ethernet cable
To maintain tightness of Ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ-45 connector) though both elements. Then crimp the cable with RJ-45
connector. Install rubber gasket (d) on the connector (c).
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
CAUTION! The other camera connectors are not hermetic. User should seal them by himself.
SPECIFICATION
Cable overview with connectors description
1. 100 Mb/s Ethernet port (RJ-45 connector)
2. Power supply 12VDC
CAUTION! Please pay attention to ensure
the correct power supply polarity!
3. Audio Input (RCA)
2. Audio Output (RCA)
5. Alarm input/output connectors
- alarm input (COM0 - orange)
- alarm input (IN0 - yellow)
- alarm output (COM1 - purple)
- alarm output (OUT1 - grey)
a
b
a
b
c
d