NVIP-5VE-4402/F
Quick start guide ver. 1.0
All rights reserved © AAT Holding S.A.
10
START
-
UP AND INITIAL IP CAMERA CONFIGURATION
2.4.
Camera mounting
To mount a camera please follow the instructions below:
•
Unscrew the locking ring (
A
) by turning it counter
-
clockwise
•
Remove the camera cover (
B
), remove the camera from the base
•
Put the bracket or mounting template to the wall in a desired mounting place (with cable hole).
Taking the bracket’s base screw holes as a pattern, mark future drilling holes for screws.
•
Drill holes in accordance with previously done markings and base hole placement.
•
Mount the camera base using the supplied plugs and screws.
•
Connect the camera cables, put camera on the base, attach the cover (
B
) and pre
-
tighten the
locking ring (
A
)
•
Adjust camera position, fully screw the locking ring (
A
)
•
Make adjustments to the camera using the on
-
screen menu (see chapter 4)
WARNING!
Please note that the wall or ceiling must have enough strength to support the IP Camera.
WARNING!
The declared degree of protection of the camera relates to its housing and does not take into
account the possibility of moisture infiltration into the interior of the camera by connecting
cables. Connection cables protection through i.e. sealing up is the responsibility of the camera
installer. The manufacturer is not liable for any damages to the camera caused as a result of
failing in performing that activity by installer, which also means that camera damaged in that
way is not subject to warranty repairs.
Focus
Zoom
A
B
The camera is equipped with a face recognition function which, in addition to proper
configuration, requires the camera to be installed in the right way and to ensure proper
working conditions. Before installing the camera, please read the instructions in the
"Installation Tips" manual, available for download on the product page.
